Technical Information - Passenger Cars
01/2015
Glasurit® plastic additive
522-10
 
G / Z

Application:

 

Additive which makes Glasurit Non-Sanding-Filler suitable for direct application to all paintable plastic substrates normally used in the automotive industry.

Properties:

 

good miscibility

Remarks:

 
  • No addition for painting of GRP necessary
  • The product can also be applied to adjacent e-coated new parts, if necessary.
  • The addition of 522-10 does not produce adhesion to unpaintable pure polypropylene (PP) and polyethylene (PE)
to top

Paint system

S 3

Mixing ratio

3 : 1 : 1
100% by vol.

 

285-31, -38, -49, -95, -0

Hardener

33% by vol.

929-56, -55

Reducer

33% by vol.

522-10

Spray viscosity

DIN 4 at 20°C

14 – 20 s

Potlife at 20°C

1 – 2 hours

Gravity cup

Spraying pressure

HVLP-gravity-feed spray gun:
1,3 mm 2,0 – 3,0 bar / 0,7 bar at the nozzle

Compliant gravity-feed spray gun:
1,3 – 1,4 mm 2,0 bar

Number of spraycoats

½ + 1 (body filled area / entire surface)
Film thickness: 20 – 35 μm

2
Film thickness: 40 – 60 µm

Flash-off at 20°C

15 – 20 min.

-

Drying at 60 °C

-

25 Min.

Sanding: manual

-

P500 - P800

Sanding: orbital sander

-

P400 - P500